Visbella® Epoxy Putty is an hand-mixable and fast-setting two part adhesive which are mixed by kneading.
Visbella® Epoxy Putty is an hand-mixable and fast-setting two part adhesive which are mixed by kneading.
Brand: | VISBELLA |
Product Code: | 540646 |
Availability: | 1111 |
-
3.50€
- Ex Tax: 2.89€
PREPARATION
Surfaces
should be clean and free from grease and oil. Slightly roughen the
surface with a wire brush or sandpaper. Cut off desired length of
Automotive Epoxy Putty and knead until uniform color is obtained.Putty
turns a grey when completely mixed.
APPLICATION
Bonding metal,glass,ceramic,wood,many rigid plastics,china,tile,fiberglass,concrete and stone.
Can be combined with fiberglass cloth for a durable patch.
Apply
the putty within 2minutes of mixing,working it firmly into the crack or
hole. For bonding, place the putty between the surfaces and apply firm
pressure to ensure intimate contact with both surfaces. For a smooth
finish, rub the putty with a damp cloth prior to hardening.
Working
time is approximately 3 minutes. After 5 to 10 minutes the putty will
harden and form a tenacious bond. After 60 minutes, the puttty can be
sanded, drilled or painted.
Recommended For:
Bonding
metal, glass, ceramic, wood, many rigid plastics, china, tile,
fiberglass,concrete and stone. Can be combined with fiberglass cloth for
a durable patch.
Not Recommended For:
Polyethylene, polypropylene, Nylon,Teflon or flexible materials.
Applying at temperatures above 120°F (49°C)
Continuously wet areas or water immersion
CLEAN UP
Cured putty may be cut away with cautin using a sharp blade.
ADVANTAGES & FEATURES
STEP 1 Cut: Cut off a piece of epoxy putty that is large enough to complete the repair.
STEP 2 Mix: Using moist hands, carefully and thoroughly knead the two-component putty together to a uniform color.
STEP 3 Apply:
Press putty firmly onto target area. If necessary, secure the putty
using a clamp or similar device for 15-20 minutes. Epoxy Putty will
harden in 1 hour and will reach full strength in 24 hours.