Menzerna AS 30
AS 30 is an effective polishing cream. AS 30 removes overspray, severe signs of use and sanding marks effectively and reliably. The polishing cream is particularly suitable for fresh, soft clear coat. AS 30 is a water based polishing cream without silicones.
General information:
Chemical information: Product Group: Heavy Cut Density: 1,3-1,5 kg/l Category: Alternative Viscosity: 5-15 Pas Cut 10 Gloss: 3
Technical information:
Application: Paint shops
Maximum abrasion: P800
Colour: Volumes: 5- 30°C, avoid frost and direct sunlight White
Recommended Usage
1. Clean surface thoroughly prior to polishing.
2. Shake the bottle prior to use and apply the following quantity of the product onto the
polishing pad.
Recommendation for a 40cm x 40cm area:
Pad with a diameter of 95mm: 3-4 pea-sized drops
Pad with a diameter of 150mm: 5 pea-sized drops
Pad with a diameter of 180mm: 6-7 pea-sized drops
3. Use the Menzerna Heavy Cut Foam Pad or Lambswool Pad in the event of heavy signs of use. With a
rotary polishing machine use our Menzerna Standard Lambswool Pad and, for an orbital polishing machine,
our Menzerna Orbital Wool Pad.
4. Use either a rotary or an orbital polishing machine and use the cross-coating method.
Apply strong, even pressure while polishing and extend the product with a constant low machine speed.
5. At first, the polish will seem a little milky and should be worked in until only a slightly transparent/oily film is
visible.